Xi5MotorUpgradeProcess
• ItmaynecessaryforcustomerswithanMotorGuideXi5trollingmotortoupdatethe
motorsoftwaretobecompatiblewiththeLowranceSmartSteerinterface
• ThemotorupgradeprocessisautomatedfromtheHDS,butdoesrelyontheuser
followingthedirectionsbelow,andthoseshownontheHDSdisplay
16 ©NavicoCompanyConfidential
Steps for updating MotorGuide Xi5 Pinpoint trolling motors for use with Lowrance SmartSteer
technology
• Update all HDS Gen2 and/or Gen2 Touch units to 3.5 software version
• The motor update process will not start unless your HDS unit(s) has been updated
with the 3.5 software
• Once the update of all units is complete, power off all HDS units and the NMEA 2000
network
• Power on the Xi5 Trolling motor, make sure the motor is in the down (deployed) position,
and has an active GPS lock (Blue GPS light illuminated on the motor)
• Power on the NMEA 2000 network and at least one networked HDS Gen2 or HDS Gen2
Touch
• Follow the onscreen instructions for the motor updates
• Once the updates are completed the Autopilot (SmartSteer) controls should
automatically enable on the HDS
• If they do not you will need to manually enable them in the Advanced Settings
menu of the HDS under “Features”
Comments to this Manuals